For all interior untreated and plastered walls, especially for fresh lime plaster. Particularly suitable for bathrooms and areas exposed to water splashes. Not to be used on wallpapered surfaces.
Fungicidal effect due to high alkalinity (pH 13). Free of preservatives, solvents and plastics. Opaque, matt, can be recoated many times. When completely dried, low tension, mold repellent and water vapor permeable.
Stir thoroughly. Apply 2-3 coatings with a brush or a roller at room temperatures above 8 °C (46 °F).
Determine the exact amount needed by doing a test application. 1 l is sufficient for approximately 6.6 m² (71 ft²), i.e. 150 ml/m². Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
Please also take a look at our color samples!