For all interior, medium absorbent stone surfaces such as quartzite, granite, marble, and Solnhofener limestone.
Impregnating, water vapor permeable. It results in an easy-care surface, semi-matt finish, which is also water and dirt repellent.
According to the absorbency and requirements of the surface, 1 – 3 applications are necessary. The first application should be always generous, adjusted to the absorbency of the surface, the second and third sparingly with the described drying time in-between. Use a roller, brush, wadded cloth, or spraying device. 15 minutes after each application remove excess oil with a lint-free cotton cloth or distribute/polish it with a single disc rotary machine and felt pad on still absorbent places. At higher temperatures, please note shorter drying times and with lower temperatures longer drying times. After distributing or polishing of excess oil the stone should have an even gloss.
Determine the exact amount needed by doing a test application. 1 liter (1.06 quart) undiluted is sufficient for approximately 50 m² (538 ft²), i.e. 20 ml/m². Coverage depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.