For interior untreated absorbent concrete, plaster and screeds.
Good adhesion and high-yield. When completely dry semi matt, elastic, opaque, resistant to water, temperature resistance up to 70°C (158°F).
If necessary, remove skin that might have formed on the product before use and stir well. Apply with brush, foam or nylon roller (without velor) undiluted at temperatures above 8°C (46.4°F). 2-3 very thin applications, roll out well – the first coat should not be covering. Dilute only for spraying with 10 % SVALOS Spray Thinner No. 293.
Determine the exact amount needed by doing a test application.
1st coat: 1 liter is sufficient for approximately 8-12 m² (86-129 ft²), i.e. 100 ml/m².
2nd coat: 1 liter is sufficient for approximately 18-20 m² (194-215 ft²), i.e. 53 ml/m².
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
And please also take a look at our color samples!