For interior surfaces such as plaster, masonry, woodchip wallpaper, gypsum plasterboards, clay plaster as well as absorbent, sound surfaces treated with dispersion paint. Not suitable for textile or vinyl wall coverings and for existing vinyl coatings.
Very high-yield, low tendency to drip, wipe-resistant surface. Can be tinted at any ratio with URA Coloring Paste No. 424, this possibly results in a lower wipe-resistance. Permeable to water vapor when completely dried. Can be painted over with DUBRON Natural White Plaster No. 465. Covering power according to DIN EN ISO 6504-3 at least 97.5% when applying 1 liter on 8 m².
Apply with a long-pile roller, a brush, or an airless spraying device at room temperatures above 12°C (50 °F). Stir thoroughly before use and do not dilute.
Determine the exact amount needed by doing a test application. 1 liter (1.06 quart) undiluted is sufficient for approximately 8 m² (86 ft²) per coat, i.e. 125 ml/m². Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.