In the interior, for oiled, sealed and varnished surfaces. Not suitable for cabinet interior surfaces.
Maintaining and refreshing. Removes slight soiling and gives a subtle shine. Free of organic-chemical compounds according to DIN EN 71, part 9.
Drop some polish on a cloth and apply sparingly, i.e. very thinly, in case of wood in the direction of the grain. The area shall no longer be sticky, otherwise apply again a few drops onto the surface and polish until it is no longer sticky. For heavier soiling allow the polish to react for 10-20 minutes, remove dirt and apply sparingly afterwards.
Determine the exact amount needed by doing a test application. 1 liter (1.06 quart) is sufficient for approximately 100 m² (1076 ft²), i.e. 10 ml/m². Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.