For interior usage on solid wooden furniture, especially bathroom furniture.
After 3 coats glossy, water resistant surface. Free of organic-chemical compounds according to DIN EN 71 part 9.
Remove possible skin formed on the surface and stir thoroughly! Test application. Depending on the requirements, absorbency and type of wood: 3 applications with a brush until layer formation, at temperatures above 16°C (60.8 °F). After 1st and 2nd application remove excess oil after approx. 5-10 minutes with a lint-free cotton cloth. For the 3rd application, distribute LINN No. 1703 drop-wise (one tea spoon per m2) and polish in immediately. Intermediate sanding with 320 grain after every application. On surfaces treated with KUNOS No. 244 or KUNOS No. 243 apply a single coat after slightly sanding with 180 grain.
Determine the exact amount needed by doing a test application.
First coat: 56 ml/m², i.e. 1 l is sufficient for approximately 18 m² (194 ft²).
Second coat: 16 ml/m², i.e. 1 is sufficient for approximately 63 m² (678 ft²).
Third coat: 11 ml/m², i.e. 1 l is sufficient for approximately 90 m² (968 ft²).
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.