Range of application
In the interior for priming wooden surfaces where the natural wood grain should not be intensified for e.g. furniture. NOT suitable for countertops and floors.
Low viscosity, transparent, quickly absorbed. Dries very fast, purely physical, i.e. by evaporation of the solvent. Prevents the intensification of the wood grain and avoids a patchy, cloudy appearance e.g. for alder, birch or beech. Odorless after drying.
By spraying, rolling, painting or bale application.
Determine the exact amount needed by doing a test application.
First coat: 1 l undiluted (1.06 quart.) is sufficient for 16 m² (172 ft²), i.e. 60 ml/m².
Second coat: 1 l undiluted (1.06 quart.) is sufficient for 40 m² (430 ft²), i.e. 25 ml/m².
As a primer for furniture: 1 l undiluted is sufficient for approximately 27 m² per coat.
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
Für Schränke innen