For interior and exterior use on robinia and other weather-resistant wood species. Not for balcony floors and other walking areas.
After the third application water-repellent, UV-resistant surface. Complies with the German Industrial Norm (DIN) 53 160, fast to perspiration and saliva. Suitable for toys according to DIN EN 71, part 3. Free of organic-chemical compounds according to DIN EN 71, part 9.
Brush dust out of pores. Depending on the range of application: 1-3 coats with a brush in the direction of the wood grain, or 1-2 times by dipping. After 30-60 minutes spread out any unabsorbed oil. Surface should not be sticky anymore, otherwise apply more sparingly or wipe off the oil. Always test robinia oil on an inconspicuous spot e.g. to check compatibility with previously applied oils or maintaining products. For maintenance do an after-treatment once a year. At higher temperatures, please consider shorter drying times and polish in more quickly. If the stain drips off or bubbles appear during application, an incompatibility exists through the pre-treatment or it has been sanded to smooth. Coarser sanding may possibly create remedy.
Oiling robinia wood with ALIS Robinia Oil
Determine the exact amount needed by doing a test application. 1 liter (1.06 quart) is sufficient for 15-30 m² (161 –323 ft²) i.e. 44 ml/m². Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
|furniture, wooden facades
0 of 0 reviews