For interior and exterior use on teak wood.
Free of cobalt. Removes light soiling, refreshes and highlights the structure of the wood grain. After complete drying water-repellent and does not form a layer. Without UV protection. Free of organic-chemical compounds according to DIN EN 71, part 9.
Put some Teak Oil on a cloth and rub on sparingly, i.e. very thinly in the direction of the wood grain. Polish after 30-60 minutes with a dry cloth. Surface should not be sticky anymore, otherwise apply again a few drops and polish until it is no longer sticky. For heavier soiling give 10-20 minutes to react, remove dirt and then apply sparingly. Refresh with ALIS Teak Oil as soon as the wood appears dry.
Determine the exact amount needed by doing a test application.
First coat: 1 liter (1.06 quart) is sufficient for approximately 30 m² (323 ft²), i.e. 30 ml/m².
Second coat: 1 liter (1.06quart) is sufficient for approximately 84 m² (904 ft²), i.e. 12 ml/m².
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.