Indoors and outdoors, for highly absorbent untreated wood and stone tiles, e.g. cotto tiles or screeds as a primer. Not for wooden floors, cabinet interiors or fruit tree wood.
Solvent-free. Reinforces and deepens the natural color of the wood grain, slow-drying. LINUS Wood and Cotto Oil No. 260 contains no protection against blue-staining fungi. Complies with the German Industrial Norm DIN 53 160, fast to perspiration and saliva. Suitable for toys according to DIN EN 71, part 3.
By painting, spraying (nozzle size 0.7 – 1.0 mm, spraying pressure: 3 bar) or dipping at temperatures above 12 °C (54 °F). Remove excess oil with a brush or a lint-free cotton cloth about 30 minutes after each application.
Determine the exact amount needed by doing a test application.
1 liter (1.06 quart) is sufficient for approximately 12-18 m² (129 – 193.7 ft²) per coat, i.e. 67ml/m². For spraying add max. 5 – 10% of SVALOS Thinner No. 222 or SVALOS Spray Thinner No. 293. For dipping use max. 100% of SVALOS Thinner No. 222 or SVALOS Spray Thinner No. 293.
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
Grundierung für sehr stark saugendes Holz.