ALIS Teak Oil N° 567
€9.50*
Available in 1 day, delivery time 2-5 days
Please note: From now on, the 0.25l container size will be supplied in brown glass bottles. The previously supplied transparent glass bottles are no longer produced by the supplier. We kindly ask for your understanding.
Application range
For interior and exterior use on teak wood.
Technical qualities
Free of cobalt. Removes light soiling, refreshes and highlights the structure of the wood grain. After complete drying water-repellent and does not form a layer. Without UV protection. Free of organic-chemical compounds according to DIN EN 71, part 9.
Application method
Put some Teak Oil on a cloth and rub on sparingly, i.e. very thinly in the direction of the wood grain. Polish after 30-60 minutes with a dry cloth. Surface should not be sticky anymore, otherwise apply again a few drops and polish until it is no longer sticky. For heavier soiling give 10-20 minutes to react, remove dirt and then apply sparingly. Refresh with ALIS Teak Oil as soon as the wood appears dry.
Coverage
Determine the exact amount needed by doing a test application.
First coat: 1 liter (1.06 quart) is sufficient for approximately 30 m² (323 ft²), i.e. 30 ml/m².
Second coat: 1 liter (1.06quart) is sufficient for approximately 84 m² (904 ft²), i.e. 12 ml/m².
Consumption could be considerably less, depending on the condition and absorbency of the surface.
Further information and processing instructions can be found in our technical data sheet.
odourless: | yes |
---|---|
Application area: | furniture |
Area: | exterior, interior |
gloss level: | silk-mat |
Material: | wood |
Product type: | oil |
Vegan products: | yes |
Login
November 11, 2018 11:13
Sehr gutes Produkt
Wir haben einen Tisch aus recyceltem Teakholz. Ursprünglich war die Oberfläche unbehandelt, verfleckte aber im täglichen Gebrauch sehr stark. Das Holz wurde ganz leicht angeschliffen (wäre aber nicht notwendig gewesen) und anschließend mit dem Alis Teakholzöl überzogen. Oberfläche sieht besser aus als bei Lieferung des Tisches ist aber eine Nuance dunkler geworden (was beim ölen einer Holzoberfläche durchaus normal ist).